Anas Naveed

@anasnaveed324
4.6(99)

Member of IEEE Electrical Design Engineers

Pakistan
English, German, French, Spanish
About me
Hello, I'm MEP Engineer by profession. I have experience of 10+ years in MEP Design, Construction Estimation/Material takeoff/Cost estimation. I have done 800+ projects for USA, UK, Canada & Australia based clients. If you need a quality work in a minimum time-lapse then you are on a right place. I mainly do the buildings (Residential, Commercial & Intermediate) MEP Designing, cost estimation, make Bill of Quantities, pricing and sometimes bid reports too which will eventually help contractors to win the bid. I am more than eager to work for you!! ... Read more

Skills

a
anasnaveed324
Anas Naveed
Offline • 
Average response time: 1 hour

See my services

Electrical Engineering
I will draw and design your electrical plan
4.6(67)
Architectural Planning
I will draw autocad electrical and mep drawings
4.9(14)

Portfolio

Work experience

Principal Engineer

MEPCorp Consult • Full-time

Dec 2018 - Present7 yrs 8 mos

Serving as Principal Engineer with a sound track record of over 15 years leading and supervising projects in the fields of Electrical, Power Generation, and Renewable Energy Technologies, specifically in solar energy. Throughout my career, I have overseen the successful completion of over 300+ projects, demonstrating expertise and excellence in each endeavor. With a steadfast commitment to excellence, I have consistently delivered innovative solutions, ensured project efficiency, and upheld the highest standards of quality and safety. My diverse portfolio and extensive experience make me a trusted leader in the industry.

Senior Design Manager

Eleken Associates • Full-time

Aug 2016 - Dec 20182 yrs 4 mos

Senior Design Manager, I was responsible for providing leadership in the following areas: - Design of Low Voltage and Medium Voltage Electrical Systems. - Power System Studies, including load flow analysis, short circuit studies, arc flash studies, protection setting and grading, cable sizing, etc. - Preparation of technical reports, specifications, schedules and operating procedures. - Planning and implementation of electrical works from feasibility study through to commissioning and handover. - Technical leadership and mentoring of less experienced electrical engineers; - When required, interfacing with clients and leading teams of designers / technicians. - Maintaining up to date in-house electrical data base (specifications, standards, drawings, etc.). - Supporting Project Management for preparation of both technical and commercial proposals.

Electrical Design Engineer

FND Consultants • Full-time

Mar 2011 - Aug 20165 yrs 5 mos

Throughout my career in the field of electrical engineering, with a focus on HT (High Tension), LT (Low Tension), and ICT (Information and Communication Technology), I've had the privilege of contributing to significant projects. Here are key points that underscore my expertise and experience: • Reviewing design and necessary modification of different electrical & low voltage service drawings and technical submittals • Approval of Technical submittal of different electrical and low voltage systems. • Inspection, approval and verify the installation of above mentioned services/equipment’s according to BOQ, approved drawings, technical specification and standards such as BS, EU, and IEE. • To review and acceptance the detail installation shop drawings of different systems including cable tray/trunking, underflow trunking and single line diagram of HT/LT Panels, generators, transformer, distribution board prior to execution of work at site. • Understanding the contract documents and applicable standards or specifications prior to execution of any jobs. • Coordination with Client / Contractor’s representatives for any site issues and inspection of works. • Overlook & monitoring the safety of electrical activities by ensuring that the project execution is according to applicable health, safety, security and environmental standards. • Witness the testing and Commissioning of Mechanical and Electrical systems.

99 Reviews
4.6

(88)
(5)
(1)
(2)
(3)
Rating Breakdown
  • Seller communication level
    4.6
  • Quality of delivery
    4.6
  • Value of delivery
    4.6
1-5 out of 99 Reviews
Sort By
Most relevant
    Y

    yusufalbuarki

    BH

    Bahrain

    2.3

    Anas has a polite and positive attitude and is capable of producing clean CAD files if you provide complete engineering calculations. However, I found that simply providing written guidelines is just the starting point; to achieve true accuracy for local utility standards, the process requires a very...

    $200-$400

    Price

    6 weeks

    Duration

    gig

    Electrical Engineering

    A

    Seller's Response

    Helpful?
    Yes
    No
    T

    tuga86

    DE

    Germany

    Order Canceled

    2

    Poor Quality and understanding

    $100-$200

    Price

    9 days

    Duration

    gig

    Electrical Engineering

    Helpful?
    Yes
    No
    A

    amargrewal403

    CA

    Canada

    5

    very quick

    $50-$100

    Price

    2 days

    Duration

    gig

    Electrical Engineering

    Helpful?
    Yes
    No
    B

    brown_tatlor

    AU

    Australia

    5

    Anas delivered exceptional work - accurate, detailed, and far beyond expectations. His technical understanding is outstanding and the project was completed before time. Truly a top-tier deisgn engineer and an absolute pleasure to work with

    $50

    Price

    5 days

    Duration

    gig

    Architectural Planning

    Helpful?
    Yes
    No
    B

    bere_habte

    UG

    Uganda

    Ongoing collaboration
    5

    Great work

    $200-$400

    Price

    1 day

    Duration

    gig

    Electrical Engineering

    Helpful?
    Yes
    No