I will develop stm32 and esp32 embedded c firmware with freertos, drivers and iot code
Professional PCB Design Engineer, Schematics Embedded Hardware
About this Gig
Have a board but need firmware that actually works?
I'm an embedded engineer who writes clean, reliable embedded firmware for STM32 and ESP32 boards in C and C++, from a single driver to a complete product application. Your hardware, your requirements, working code.
What I develop:
- STM32 firmware with STM32CubeIDE, HAL, LL, or bare metal
- ESP32 firmware with ESP-IDF, PlatformIO, or Arduino
- FreeRTOS tasks, queues, timers, and interrupt driven designs
- Drivers for UART, SPI, I2C, ADC, PWM, USB, CAN, and RS485
- Sensor integration: IMU, temperature, pressure, GPS, displays
- BLE, Wi-Fi, LoRa, and LoRaWAN communication
- Low power modes, bootloaders, and OTA updates
- Debugging crashes, hard faults, timing issues, and memory leaks
You receive:
- Well commented embedded firmware source code
- Build instructions and a short test report
- Support after delivery for questions on the code
I also work on nRF52 and RP2040. Your code stays yours, and I'm happy to sign an NDA.
Message me with your MCU, board, and what the firmware must do, and I'll confirm the package and timeline before you order.
Platform:
STM32
Expertise:
Firmware development
•
RTOS
•
Debugging
Other Electronics Engineering Services I Offer
FAQ
Do you need my hardware to write the firmware?
Not always. I can develop on an equivalent dev board (Nucleo, ESP32 DevKit) and you test on your board. For custom boards, sharing the schematic is enough to start; I'll tell you if a sample board is needed.
Which microcontrollers do you support?
STM32 (F0 to H7, L and G series), ESP32 (classic, S3, C3), nRF52, and RP2040. Ask about other MCUs and I'll confirm before you order.
Can you fix or finish existing firmware?
Yes. Send your project and a description of the problem. I debug crashes, hard faults, timing and memory issues, and can extend or refactor existing code.
Do I own the source code?
Yes. You receive the full source code with build instructions, and all rights to it once the order is complete.
Can you also design the PCB?
Yes. If you need custom hardware too, check my ESP32 and STM32 IoT PCB gig or message me for a combined offer.
