I will design a custom electronics pcb for your robot, sensor or embedded device
AI Developer, Robotics Engineer, FPV Drone Design Expert
Level 1
Has met certain performance criteria and shows strong potential in the marketplace.
About this Gig
I design the electronics for your project as a clean schematic and a PCB layout, checked with the standard design tools before delivery. Typical boards: sensor and IMU boards, motor and power boards, microcontroller (STM32, ESP32, RP2040) boards, interface and breakout boards, and robot controller boards.
What you get: a schematic with electrical rule checks, a PCB layout with design rule checks, Gerber and drill files for manufacturing, a 3D STEP model, a PDF of the schematic and layout, and the editable source project. Standard and Premium also include a BOM.
How I work: you send the requirements (power, interfaces, size, parts you want or need). I propose a block diagram and board size, then build the schematic, place and route the board, and check it. You review and I apply the revisions included in your package.
Please note: I deliver design files. I do not manufacture or assemble boards, and I do not test physical hardware unless we agree on that separately. Complex or high current designs are scoped before I quote.
File format:
Gerber
•
STEP
•
VRML
•
SCH
•
Software:
KiCad
Interface:
UART
•
USB
•
SPI
•
I2C
•
PCIe
•
Controller Area Network (CAN)

