I will troubleshoot debug fix pcb schematic dfm redesign manufacturing error gerber fix

Your PCB was manufactured, but it does not work as expected?

I will review, troubleshoot and redesign your schematic and PCB to identify the likely root cause and prepare a corrected design for your next prototype or production revision.

Maybe:

The board does not power on.

The MCU will not boot.

A regulator gets hot.

The sensor does not respond.

USB is unstable.

WHAT I CAN HELP FIX

• PCB troubleshooting
• Schematic debugging
• PCB design review
• PCB redesign
• Circuit review
• Power problems
• Short circuit issues
• Incorrect component values
• Missing pull ups / pull downs
• MCU boot issues
• Reset circuit problems
• Crystal / oscillator issues
• Voltage regulator problems
• Power sequencing issues
• Ground problems
• Decoupling problems
• Sensor communication issues
• I2C problems
• SPI problems
• UART problems
• CAN-bus problems
• RS485 problems
• USB issues
• ESP32 hardware problems
• STM32 hardware problems
• Connector mistakes
• Wrong pin mapping
• PCB footprint issues
• Trace-width problems
• Clearance problems
• High current issues
• Thermal issues
• EMI-sensitive layout review
• Gerber review
• BOM review
• DRC review
• Manufacturing optimization
• DFM review
• Existing board redesign

KINDLY SEND ME A MESSAGE BEFORE PLACING AN ORDER