I will design drone flight controller pcb with px4 ardupilot stm32 uav

Need a custom drone or UAV flight controller PCB designed around PX4 or ArduPilot?

I will design a professional drone flight controller PCB for UAV, quadcopter, VTOL, robotics and autonomous flight projects. The design can be based on STM32 and can support the hardware interfaces required for your flight-control system.

Depending on your project, I can work with components and interfaces such as IMU, GPS/GNSS, RTK GPS, CAN bus, DroneCAN, UART, I2C, SPI, PWM, ESC connections, telemetry and power management.

Services can include:

• Custom drone flight controller PCB design
• PX4 and ArduPilot hardware integration
• STM32-based UAV electronics
• Pixhawkstyle flight controller boards
• Sensor and IMU integration
• GPS/GNSS and RTK interfaces
• CAN/DroneCAN connectivity
• ESC and motor-control interfaces
• Schematic and PCB layout
• Connector and power architecture
• Design files prepared for manufacturing

Whether you need a prototype flight controller, custom UAV board, or hardware platform for PX4/ArduPilot, I can develop the PCB around your required components and specifications.

Please send your requirements, existing schematic/reference board, preferred MCU, sensors and required interfaces .