Browse categories
Explore
Fiverr Pro
English
$
USD
I will design embedded system pcb schematics with esp32 and stm32 in easyeda
Professional PCB Designer
I'm a PCB design engineer focused on motor drivers and robotics power electronics. Using KiCad, I turn circuit requirements into manufacture-ready boards — clean schematics, optimized layouts, and DRC...
About this Gig
Need a custom board built around an ESP32 or STM32 that actually works right out of the box?
I design embedded system PCBs around these microcontrollers from breakout boards to full dev boards with sensors, power management, and communication interfaces. Schematics and layouts are done in EasyEDA with proper decoupling, power sequencing, and signal routing, so your firmware runs on hardware that doesn't fight you.
What I bring:
- ESP32/STM32 schematic and PCB layout
- Power regulation (LDO, buck/boost) circuits
- Sensor and peripheral integration (I2C, SPI, UART)
- USB-to-serial programming circuitry
- Clean, well-decoupled routing
Deliverables:
- EasyEDA project files (schematic + PCB)
- Gerber files and BOM
- 3D board render (Standard & Premium)
- Pinout documentation
Whether it's a sensor node, a dev board, or a prototype, you'll get a layout that's clean, manufacturable, and ready for JLCPCB, PCBWay, or your fabricator.
Why work with me:
- Embedded MCU boards are my main focus
- Clear, responsive communication
- Production-ready files, on time
Message me with your MCU, peripherals, and interfaces before ordering.
CONTACT ME BEFORE PLACING AN ORDER!!!
FAQ
Do you work with both ESP32 and STM32 families?
Yes — ESP32/ESP32-S3/ESP32-C3 and STM32F/STM32G series are all within scope. Let me know your exact chip before ordering.
Can you add sensors or wireless modules to the design?
Yes, I2C/SPI sensors and external wireless modules can be integrated in the Standard and Premium packages
What software do you use?
EasyEDA for schematic and PCB layout. Files can be exported to other formats on request.
Will you include the programming/flashing circuit?
Yes, USB-to-serial programming interface is included in every package.
