Browse categories
Explore
Fiverr Pro
English
$
USD
I will design multilayer pcb layout with schematic, gerber, bom and assembly files
About this Gig
Single and double-layer boards are fine for simple projects.
But when your design has high-speed signals, RF circuits, dense component placement, or strict EMI requirements you need multilayer. And multilayer done badly costs you in failed prototypes, EMI failures, and weeks of respins.
I design 2, 4, and 6-layer PCBs built for real manufacturing. Using KiCad and Altium Designer, I handle the full design flow schematic capture, layer stackup planning, signal integrity, controlled impedance routing, power plane design, and DRC-clean Gerber generation. Every file is optimised for JLCPCB and PCBWay from the start.
What You Get:
- ERC and DRC-clean schematic and multilayer layout
- Full Gerber and drill file set
- Layer stackup documentation
- Accurate BOM with LCSC or Mouser part numbers
- Pick-and-place file for SMT assembly
- Assembly drawing
- 3D PCB model
Who this is for:
- Hardware startups moving from prototype to production.
- Engineers who need a board designed right the first time.
- Product teams who cannot afford PCB respins.
Message me before ordering and I will confirm the layer count and timeline for your specific design.
FAQ
When do I need a 4-layer or 6-layer board?
You need a 4-layer board when your design has high-speed digital signals, dense component placement, mixed analog and digital circuits, or when EMI performance matters. A 6-layer board is typically needed for complex RF designs, DDR memory interfaces, or boards that must pass FCC or CE certification
What is controlled impedance, and do I need it?
It means the PCB traces are manufactured to a specific electrical impedance, usually 50 or 100 ohms. It is needed for USB 3.0, HDMI, Ethernet, RF traces, and high-speed serial interfaces. I calculate the trace widths, specify the stackup, and route accordingly so your board passes signal integrity.
Can you design a specific manufacturer's stackup like JLCPCB's standard 4-layer?
Yes. I design the exact stackup specifications of JLCPCB, PCBWay, or whichever manufacturer you are using. This ensures the controlled impedance values are accurate for the actual material your board will be made from. Tell me your manufacturer when ordering and I will use the correct stackup data.
Do you provide a BOM with component part numbers I can use to order parts?
Yes. The BOM I deliver includes component values, footprints, and either LCSC part numbers for JLCPCB SMT assembly or Mouser and DigiKey part numbers for self-sourcing. You can use it directly to order components without any additional research.
Can you take over a half-finished PCB design someone else started?
Yes. Share the existing KiCad, Altium, or EasyEDA project files and I will review the work done, identify issues, and complete or correct the design. Message me first with the files so I can assess the scope before you order.
