I will design custom radar based proximity sensor pcb and distance sensing development
pcb design
About this Gig
I design radar sensor integration and embedded PCB solutions for proximity detection, motion sensing, distance measurement and mmWave applications.
My services include:
- 24GHz and 60GHz radar sensor integration
- mmWave radar carrier board design
- FMCW and Doppler radar hardware integration
- TI and Infineon radar platform integration
- ESP32 and STM32 controller integration
- Power management and protection circuits
- UART, SPI, USB and CAN interfaces
- Radar antenna and RF layout considerations
- Proximity and motion detection firmware
- Schematic, PCB layout, BOM and Gerber files
I focus on RF-aware PCB layout, signal integrity, power integrity, component selection and manufacturing-ready documentation.
Whether you need a radar carrier board, an industrial proximity sensor or a custom mmWave integration solution, I can help develop the hardware around your requirements.
Contact me before ordering with your radar frequency, sensor/module model, detection range, operating voltage and required interfaces.
FAQ
What types of radar PCBs can you design?
I can design radar sensor carrier boards, proximity detection hardware, mmWave integration boards and embedded radar controller PCBs.
Do you support 24GHz and 60GHz radar sensors?
Yes. I can integrate compatible 24GHz and 60GHz radar modules based on your application and selected hardware platform.
Can you work with TI and Infineon radar modules?
Yes. I can work with supported TI mmWave and Infineon radar platforms using their available documentation and reference designs.
Can you integrate ESP32 or STM32?
Yes. I can integrate ESP32 or STM32 controllers for radar communication, peripheral control and application-specific processing.
Can you design the radar antenna?
Antenna integration and RF-aware PCB layout are available. Custom antenna-array and advanced RF transceiver design require separate technical assessment.
Can you develop radar detection firmware?
Yes. Depending on the selected radar platform, I can develop basic firmware for communication, sensor configuration, motion detection and data processing.
What files will I receive?
Depending on your package, deliverables include schematics, editable PCB files, Gerber, BOM, CPL, DRC reports and agreed firmware source files.
