I will review pcb design, fix dfm issues, schematic and gerber errors

M
mayoz_socials
M
mayoz_socials
Mayoz
review pcb design, fix dfm issues, schematic and gerber errors
Full Screen
review pcb design, fix dfm issues, schematic and gerber errors

About this gig

DFA CHECK | DESIGN AUDIT | IPC COMPLIANCE | BOM LIFECYCLE CHECK | PCB ERROR FIX | FABRICATION READINESS | SIGNAL INTEGRITY REVIEW |


The most expensive mistake in PCB manufacturing isn't a design error it's finding that error after 500 boards have already been assembled.


I review designs specifically to catch what doesn't show up in a quick visual check or a basic simulation: acid traps hiding in acute-angle traces, thermal relief that will cause soldering defects on ground pours, silkscreen sitting on top of pads, and BOM parts showing "10,000 in stock" right up until you actually try to order them.


Offer Includes:

  • Full DFM & DFA compliance audit
  • Fabricator-specific capability cross-check
  • Trace width, clearance & acid trap detection
  • Thermal relief & solder defect risk review
  • Layer stack-up & impedance validation
  • BOM lifecycle & obsolescence audit
  • Silkscreen & assembly clearance verification
  • IPC Class 2/3 standard compliance check
  • Severity-ranked written issue report
  • Direct fixes applied to gerber/native files


Share Your Files & Specs. Catch Production Risks Early.

  • App type

    • Developer tools
    • Graphics & design
    • Product/Service marketing

  • Design tool

    • Adobe XD
    • Sketch
    • Adobe Photoshop

  • Device

    • Mobile
    • Desktop
Delivery style preference

Please inform the freelancer of any preferences or concerns regarding the use of AI tools in the completion and/or delivery of your order.

Get to know Mayoz

Mayoz

From product concept to production ready hardware

  • FromFrance
  • Member sinceMay 2026

  • Languages

    English, French, German, Spanish
I take hardware from concept to production-ready PCB, and rescue it when things go wrong. My work spans product-to-prototype design for hardware startups, industrial control panel schematics built to NEC/IEC standards, PCB reverse engineering for undocumented legacy boards, and DFM audits that catch failures a checklist misses before a production run does. I work directly with mechanical designers, PLC programmers, and procurement teams, and every deliverable ships with a written technical report, not just files. Send your concept, panel, or board and I'll tell you plainly what it needs.

Related tags