Browse categories
Explore
Fiverr Pro
English
$
USD
I will do pcb design, iot project, arduino or esp32 program and electronic engineering
PCB Design Engineer Hardware And Products Development Professional
My name is Michael, a professional Electrical and Electronics Engineer specializing in PCB design, schematic capture, and hardware development for startups and product developers.
What I offer:
• 2-...
About this Gig
Are you looking for a professional engineer to bring your hardware ideas to life? As an experienced Electronics and Embedded Systems Engineer with over 6 years of hands-on experience, I specialize in firmware development, hardware prototyping, and circuit design across various microcontrollers.
Whether you need a quick Arduino script or a complete commercial smart product, I offer comprehensive, end-to-end support for your embedded projects.
Core Expertise:
- Microcontrollers: Arduino, ESP32, ESP8266, Atmel AVR, and STM32
- Smart Products: IoT development and automated custom solutions
- Hardware Design: Custom electronic circuits and professional PCB design
Services Offered:
- Circuit & Schematics: Component selection, clean circuit diagrams, and flowcharts
- Code & Firmware: Custom programming, strict debugging, and code optimization
- Testing: Reliable prototype building and virtual simulation testing
Supported Software & Platforms:
- IDE: Arduino IDE
- Simulation & Design: Tinkercad, Proteus, EasyEDA
I provide detailed and easy-to-understand schematics, ensuring a smooth project experience.
Contact me now to get stated with your project.
Thanks
Specialization:
Circuit design
•
Schematics
•
Layout
•
Footprint
•
Gerber
File format:
Gerber
•
SCH
•
ODB
Software:
Altium Designer
•
EasyEDA
•
KiCad
•
Proteus
•
Fritzing
FAQ
What files will I receive after ordering?
You'll get Gerber files, drill files, schematic, BOM, Pick & Place, 2D images, 3D renders, and STEP files — fully formatted for JLCPCB and PCBWay. Everything your manufacturer needs to produce your board immediately.
Can you design PCBs for ESP32, STM32, or Arduino?
Yes. I regularly design PCBs for ESP32, ESP8266, STM32, Arduino, and RP2040. From simple IoT sensor nodes to full development boards with USB, SPI, I2C, and UART — I handle schematic design and PCB layout start to finish.
Do you use Altium Designer or KiCad?
I work in Altium Designer, KiCad, EasyEDA, and Proteus. I can continue an existing project in your preferred tool and deliver native files plus Gerber, BOM, Pick & Place, and STEP exports with every order.
Are Gerber files compatible with JLCPCB and PCBWay?
Every design is reviewed against JLCPCB and PCBWay DFM guidelines before delivery. Clearances, drill sizes, and copper weights are all verified. For JLCPCB assembly, I also prepare BOM and CPL files in their required format.
Can you start from a rough idea or hand-drawn schematic?
Yes. Share your concept, block diagram, or reference circuit and I'll build a complete schematic first, get your approval, then move to PCB layout. You stay in control before any Gerber files are generated.
Do I need a multilayer PCB for my project?
If your design has high component density, high-speed signals, or needs dedicated power and ground planes — yes. STM32, USB hubs, HDMI, and RF modules typically need 4+ layers. Message me and I'll advise the right stackup.
Can you reverse engineer an existing PCB?
Yes. Share photos or partial documentation of your existing board and I'll reconstruct the schematic and create a clean, updated PCB layout. Useful for legacy hardware, discontinued boards, or redesigns needing improvement.
