Browse categories
Explore
Fiverr Pro
English
$
USD
I will design pcb, pcb layout, esp32 pcb, schematic, gerber and bom files
Embedded Systems Engineer, Firmware, PCB Design, IoT
I am an Electronics Engineer who develops embedded and IoT products from concept to completion. My work includes system architecture, PCB design, firmware development, hardware-software integration, c...
Level 1
Has met certain performance criteria and shows strong potential in the marketplace.
About this Gig
I design clean, manufacturable PCBs for IoT devices, embedded systems, and consumer electronics using KiCad, Altium, and EasyEDA.
From schematic to production-ready Gerber files, I handle the complete PCB design process.
What I cover
- Schematic design and review
- Single and multi-layer PCB layout
- ESP32, STM32, nRF52, and ARM-based board design
- Design for Manufacturing (DFM) checks
- Signal integrity and EMI/EMC considerations
- Component footprint creation and library management
- BOM optimization and component sourcing guidance
- Gerber, drill files, and pick and place file delivery
- PCB prototype and production file preparation
What you get
- Production-ready Gerber and drill files
- Clean schematic and optimized PCB layout
- Complete BOM (Bill of Materials)
- Pick and place files for assembly
- Fast turnaround and clear communication
I have designed PCBs for IoT devices, industrial electronics, wearables, consumer products, and embedded systems.
Note: Message me before ordering, share your requirements and I will confirm what I can deliver.
My Portfolio
Other Electronics Engineering Services I Offer
FAQ
Which software do you use for PCB design?
I use KiCad and EasyEDA. Both are industry-standard tools and produce clean, manufacturer-ready files.
What files will I receive at the end?
You will receive Gerber files, drill files, and BOM (Bill of Materials) — everything your manufacturer needs to produce the board.
Can you design a PCB from scratch if I only have an idea?
Yes. Share your requirements and I will handle schematic design first, then move to PCB layout.
Will the PCB be ready to send directly to a manufacturer?
Yes. All designs go through DFM (Design for Manufacture) checks before delivery.
How many layers can you design?
I work with 2-layer and 4-layer boards. If you are unsure which you need, message me and I will advise.
Do you offer revisions?
Yes. Each package includes revisions — check the package details for the exact number.
Can you work with ESP32, STM32, or nRF52 based designs?
Yes, these are my most common boards. I am familiar with their layouts, power requirements, and RF considerations.
