Browse categories
Explore
Fiverr Pro
English
$
USD
I will design drone pcb flight controller esc uav electronics fpv stm32 px4 ardupilot
Embedded PCB Design Engineer for IoT Automotive Drone and Industrial Hardware
I design professional PCB hardware for IoT products industrial automation drones robotics automotive systems and embedded devices. My work includes KiCad and Altium PCB design STM32 and ESP32 hardware...
About this Gig
I will design custom drone PCB and UAV electronics for FPV, commercial, robotics, and autonomous aerial platforms. My service covers flight controller PCB, ESC, PDB, power distribution, telemetry, GPS/GNSS, IMU, CAN, UART, I2C, SPI, RF modules, and embedded hardware.
I can develop STM32-based flight control boards for PX4, ArduPilot, Betaflight, and DroneCAN architectures, with careful power integrity, signal integrity, grounding, thermal management, and compact multilayer PCB layout.
You can use this service for quadcopters, hexacopters, VTOL aircraft, FPV drones, autonomous UAVs, inspection platforms, and custom robotics electronics.
Deliverables can include schematic, component selection, PCB layout, BOM, Gerber, drill files, pick-and-place, and manufacturing documentation. I can also optimize an existing design for size, weight, power, EMI/EMC, connector placement, and production readiness.
Whether you need a new flight controller, ESC board, PDB, telemetry PCB, or integrated UAV electronics, send your requirements and I will help define the right architecture before PCB development.
FAQ
Can you design a custom drone flight controller PCB?
Yes. I can design custom flight controller hardware using STM32 and compatible sensors, interfaces, power management, and autopilot architectures.
Can you design an ESC or PDB for my drone?
Yes. I can design BLDC ESC, 4-in-1 ESC, power distribution board (PDB), and related motor-power electronics.
Can you make a PCB compatible with PX4 or ArduPilot?
Yes. I can develop hardware around PX4 or ArduPilot requirements, including STM32, IMU, GPS/GNSS, CAN, UART, SPI and I2C interfaces.
Do you design FPV drone electronics?
Yes. I can develop FPV drone PCB solutions including flight controllers, ESCs, PDBs, power systems, telemetry and peripheral interfaces.
Can you design UAV electronics with GPS and telemetry?
Yes. GPS/GNSS, telemetry radios, RF modules, IMU sensors, CAN and other UAV peripherals can be integrated into the electronics architecture.
Do you provide manufacturing-ready files?
Yes. Depending on the package, deliverables can include schematic, PCB layout, BOM, Gerber, drill, pick-and-place and manufacturing documentation.
Can you design multilayer drone PCBs?
Yes. I can design compact 2-layer, 4-layer and higher-layer-count UAV boards where the electrical and mechanical requirements justify a multilayer stackup.
