Browse categories
Explore
Fiverr Pro
English
$
USD
I will design pcb raspberry pi compute module cm4 cm5, carrier board, cm5 io board
About this Gig
I specialize in designing custom Raspberry Pi CM4 and CM5 carrier boards, baseboards, and IO boards, from schematic and component selection through high-speed PCB layout and manufacturing files.
It's often called a Raspberry Pi CM5 IO board, CM5 carrier board, or CM5 base board.
I have designed such custom PCBs for Raspberry Pi CM4, Raspberry Pi CM5, Orange Pi CM5, Banana Pi CM5, Radxa CM5, ComputeLab iMX8, Toradex iMX7, Toradex iMX8, Nvidia Jetson Nano, Jetson Xavier NX, and many more.
What I can design:
- Raspberry Pi CM4 / CM5 Carrier & IO Boards
- Custom CM5 Baseboards & Development Boards
- USB 2.0 / USB 3.0
- Gigabit Ethernet & networking
- PCIe & M.2 NVMe
- HDMI / DisplayPort / MIPI DSI
- MIPI CSI camera
- GPIO, UART, SPI, I²C & CAN
- RS232 / RS485
- Audio interfaces & codecs
- Wi-Fi / Bluetooth integration
- SD / eMMC / storage interfaces
- Power supply, PMIC & battery circuits
- Fan, RTC, sensors & peripheral
- High-speed differential-pair routing
- Multilayer PCB design & controlled impedance
- Design review, DFM and prototype support
Send me your requirements, block diagram or reference board today!!
FAQ
1. Can you design a custom Raspberry Pi CM4 or CM5 carrier board from scratch?
Yes. I can develop the complete board from your requirements, block diagram, or reference design, including schematic, component selection, PCB layout, high-speed routing, and manufacturing files.
2. Can you design a CM5 IO board with M.2, PCIe, USB, Ethernet, HDMI, and MIPI?
Yes. I can integrate interfaces such as PCIe, M.2 NVMe, USB 2.0/3.0, Gigabit Ethernet, HDMI, MIPI CSI/DSI, GPIO, UART, SPI, I²C, CAN, and more, depending on the CM5 architecture and your requirements.
3. Which PCB design software do you use?
I can work with KiCad, Altium Designer, EasyEDA, Eagle, and other professional PCB design tools. I can also provide the appropriate editable source files and manufacturing outputs.
4. Can you provide Gerber, BOM and Pick & Place files for manufacturing?
Yes. Depending on your package, I can provide Gerber/ODB++, BOM, Pick & Place, drill files, assembly drawings, schematics, PCB source files, and other manufacturing documentation.
5. What do you need from me to start the project?
You can send your requirements, block diagram, reference board, datasheets, interface requirements, mechanical dimensions, or existing schematic/PCB files. If you only have an idea, I can help define the hardware architecture and required interfaces.
