I will do fea and cfd analysis in ansys fluent and solidworks simulation


About this gig
Hello,
Do you need FEA or CFD analysis to back a design decision? I run structural, thermal and CFD analysis in ANSYS and SolidWorks.
I am a mechanical engineer with 8+ years of simulation experience in ANSYS Fluent, CFX, ANSYS Mechanical, SolidWorks Simulation and OpenFOAM.
What I analyze:
- Structural analysis: stress, deformation and factor of safety for parts, frames and assemblies
- Nonlinear contact, drop and impact
- Thermal analysis and thermal-structural coupling
- CFD analysis: internal and external flow, pressure drop, heat transfer
- Turbomachinery with MRF and sliding mesh
Proof: on a micro gas turbine I diagnosed compressor stall at pressure ratio 2.1, redesigned it to 4.0 and reached self-sustaining combustion to 18,000 RPM.
You get:
- Documented setup, mesh and boundary conditions
- Result plots and a PDF report with design recommendations
- ANSYS or SolidWorks files on request
I do every project myself, no outsourcing.
Before ordering, send your CAD (STEP, Parasolid or SolidWorks), loads and goals. I will confirm the right package or send a custom offer.
Best,
Muhammad
Delivery style preference
Please inform the freelancer of any preferences or concerns regarding the use of AI tools in the completion and/or delivery of your order.
Get to know Muhammad A.
FEA, CFD Simulation Engineer
- FromPakistan
- Member sinceNov 2026
- Avg. response time2 hours
Languages
Urdu, English, Hindi
FAQ
Which package should I choose?
Basic covers one part with one load or flow case. Standard covers assemblies up to 5 parts, or CFD with heat transfer and up to 3 cases, with a mesh study. Premium covers nonlinear, transient, impact or turbomachinery work plus one design iteration. Not sure? Message m
What do you need from me to start?
Your CAD (STEP, Parasolid or SolidWorks), materials, loads and supports or flow conditions (flow rate, pressure, temperature), and your acceptance criteria, such as a minimum factor of safety, maximum deflection or target pressure drop.
Which software do you use?
ANSYS Fluent and CFX for CFD, ANSYS Mechanical and Explicit Dynamics for FEA, plus SolidWorks Simulation, SolidWorks Flow Simulation and OpenFOAM. If your team uses one of these, I deliver native files you can open and rerun. Also you can let me know if there are specific software requirements.
How do you make sure the results are accurate?
Standard and Premium include a mesh study. On every project I check key results against hand calculations or published data where possible, and document every boundary condition and assumption so your reviewer can trace each number.
What is included in the report?
A PDF with geometry, materials, assumptions, mesh details and boundary conditions, then result plots (stress, deformation and factor of safety for FEA; pressure, velocity and temperature for CFD), conclusions and design recommendations.
Do I get the source files?
Yes. Standard and Premium include the native ANSYS or SolidWorks files. With Basic, ask me and I can add them.
I only have 2D drawings or a sketch. Can you still help?
Yes. I can build the 3D model in SolidWorks from your drawings or a dimensioned sketch, then run the analysis. Modeling is quoted as a custom offer based on part count and complexity.
Will you sign an NDA?
Yes. I can sign your NDA before you share any files. Your CAD, data and results are used only for your project and are never shared or reused.
Do you handle turbomachinery and rotating parts?
Yes. I use MRF for steady performance and sliding mesh for transient rotor-stator interaction. On a micro gas turbine I diagnosed compressor stall at pressure ratio 2.1 and redesigned it to 4.0. This work falls under the Premium package.

