I will create professional high power pcb for power electronics systems

If you are working on a motor driver or a power converter and your board keeps overheating or blowing traces, the layout is usually the culprit. Power electronics is not like digital logic. You cannot just auto-route and hope for the best. You need to think about thermal paths, creepage distances, and EMI.

I build boards that actually survive real-world testing. I focus on making sure your high-current paths are beefy enough and your gate drivers are clean. No buzzwords, just solid engineering.

Service Included:

1. Schematic capture and review
2. Layer stackup for thermal management
3. High current trace calculation
4. Creepage and clearance check
5. Thermal via placement
6. Gate driver loop optimization
7. EMI and noise reduction layout

After designing everything from solar inverters to EV chargers, I have learned that thermal management is 90 percent of the job.

How it works:

1. You send me your schematic or project requirements

2. I create the layout and thermal strategy

3. We review the 3D model and component placement

4. Final delivery of all manufacturing files

Send over your specs and let's see what we can do.